• Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth.
• Mix components A and B at the ratio of 1:1 in weight and apply the mixture onto the substrate to be bonded.
• Press and rotate the substrates while bonding.
• Initial curing in 5-10 minutes. It takes one hour and 24 hours to reach its use strength and maximum strength respectively.
• DO NOT mix a great amount of adhesive at one time.

• Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
• Store the adhesive at room temperature.
• Keep away from any source of ignition.

• The adhesive is irritable to skin and eyes.
• Keep out of reach of children.
• In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters