Home > Epoxy AB Glue >

30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification

Product Categories

Hunan Baxiongdi New Material Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification

Ask Lasest Price
Brand Name :	DEYI
Supply Ability :	500000 Piece/Pieces per Month
Price :
Model Number :	DY-E730
Payment Terms :	T/T

Add to Cart

Product Details
Company Profile

30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification

30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification Other Adhesives

30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.

Technical Parameters

Color

Viscosity
(CPS/25℃)

Mixture

Work Time(25℃/100g)

Cure Time
(25℃/100g)

Lap Shear Strength
(St-St)

Heat Resistance
(℃)

Shelf Life
(25℃)

A:black

A:>100000

1:1

20 Minutes

Touch Dry:

30 Mins

≥16 Mpa

-60 to +100

12 months

B:milky white

B:>100000

Full Cure:
24 hrs

Products Description

30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification

STORAGE&WARNINGS

Storage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.

Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

DERECTIONS

* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.

Product Tags:


*From:	Your email address is incorrect!
*To:	Hunan Baxiongdi New Material Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!