1. Properties
DY-E710 EPOXY TILE GROUT is a two-component sealant based on epoxy
resin. It is resistant of acid, alkali, water, mold, and easy to
clean. It cures fast and creates no shrinkage.
2. Applications
DY-E710 EPOXY TILE GROUT is widely used to fill in gaps and edges
in bathrooms, kitchens, bathtubs, balconies, floors and wall tile
grouts.
3. Directions
- Clear the tile joints.
- Use the mask tape along the tile gap.
- Mix the two components at the ratio of 1:1.
- Before filling the gap, discard the first 30cm of extruded adhesive
to prevent uneven mixing and incomplete curing.
- Use the professional caulking gun and mix nozzle.
- Squeeze the grout into the tile gap.
- Use a steel ball or scraper to smoothen the surface.
- Finally peel the tape off carefully.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing
places.
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical
treatment immediately if necessary.
5. Parameters
DY-E710(400ML) |
Dosage Ceramic | 1.5mm | 2mm | 2.5mm | 3mm |
800x800mm | 20 | 18 | 15 | 12 |
400x800mm | 15 | 13.5 | 11.3 | 9 |
600x600mm | 15 | 13.5 | 11.3 | 9 |
500x500mm | 12.5 | 11.3 | 9.4 | 7.5 |
300x600mm | 11.2 | 10.1 | 8.4 | 6.7 |
400x400mm | 10 | 9 | 7.5 | 6.0 |
300x300mm | 7.5 | 6.8 | 5.6 | 4.5 |
200x200mm | 5 | 4.5 | 3.8 | 3.0 |
100x100mm | 2.5 | 2.3 | 1.9 | 1.5 |
50x50mm | 1.3 | 1.1 | 0.9 | 0.8 |
