• Surfaces must be thoroughly clean and dry. Remove the cap and pierce membrane.
• Smoothen adhesive immediately after application as it dries in approximately 10 mins. Adhesive will fully cure in 24-48 hours depending on thickness of application. It is paintable with oil or water based paints.
• Uncured adhesive can be removed by cleaning with water. Cured adhesive can be removed by cutting & scraping and methylated spirits.
• After use, recap the tube.

• Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
• Store the adhesive at room temperature.
• Keep away from any source of ignition.

• The adhesive is irritable to skin and eyes.
• Keep out of reach of children.
• In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters